TouchStar TS3000
specification
Physical
Dimensions – 200mm (W) x 45mm (D) x 130mm (H)
Weight – 900g
Case – Impact resistant, flame retardant
Case Material – UV stabilised polycarbonate
Internal Chassis – Mounted on rubber shock absorbers
Display Specification
7” Colour TFT, Anti-Glare, 16:9 Ratio, Wide 16:9 WVGA
800 x 480 pixels, LED Backlit, Direct Sunlight Readable
TouchScreen
High Impact Polycarbonate,
Resistive – Glove operable – Signature capture
Audio Specifications
High Power Speaker
Performance Specification
Processor – TI OMAP 800MHz - 1GHz
Memory / Storage Specifications
256MB NAND Flash – Standard - 512MB Option
256MB Low Power DDR RAM - 512MB Option
Power Specification
9 to 26V DC, 580mA (typical @ 12V) - 1700mA
Communication and Interface Ports
2 x Micro SD Card,
SD Card – SDIO, USB 2.0 OTG, SIM Card Socket
Internal Battery Backup
Single Lithium Ion cell, 1200mAh, 4.6Wh
Removable Rechargeable Battery
Main Battery Removable 7.4V 4200mAh, 31Wh
Cradle Interface
USB 2.0 Host, RS232 - 9pin (TX, RX, CTS, RTS, DTR, DSR,
CD, RI), CAN Bus, Ethernet 10/100Base-T, Microphone
input, Speaker/Headset output, HSPA connector for external
antenna (switched), GPS connector for external antenna
(switched), Cradle Charge Detect, Power Input 10.25V
WiFi
802.11a/b/g/n (2.4GHz/5GHz)
GPS Module Performance
Multi-GNSS receiver, GPS, Glonass, Galileo, QZSS,
Hot Start < 1Ss - Cold Start < 35s, NMEA
3G HSPA Module – Mobile Broadband
HSPA+ 7.2 Mbps downlink - 5.7 Mbps Uplink
Bluetooth
Bluetooth 2.1 + EDR, Hands Free Audio Interface support
Rear Camera
3M Pixel
Flash
LUXEON Flash
Expansion Port
Additional RS232 RX, TX, RTS, CTS
Scanner/Imager Options
Imager 1D - 2D
Operating System
Microsoft Windows Embedded Compact 7,
Application Support Package, Full Dialler Application –
Bluetooth, Full Range of Mobile Applications
Operating Temperature
-20˚C to +50˚C
Storage Temperature
-30˚C to +70˚C
Shock
1.5m drop onto Concrete
Environmental
IP65
Accessories
4 Gang Battery Charger, In-Vehicle Cradle & Cable
assemblies, Expansion Hub & Cable assemblies,
Smart Hub & Cable assemblies
Approvals
CE / FCC
ATEX / IECEx